topic Re: HP SIM 4.2 -SP2 in Server Management - Systems Insight Manager

HP SIM 4.2 -SP2

Alfred Aragon — Tue, 13 Mar 2007 09:56:34 GMT

Does anyone know what would cause the system page to not display all of a sudden on all servers?

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Tue, 13 Mar 2007 10:12:32 GMT

If you want people to be able to help you out,you should apply you re points, in you 2 other questions you have posted.

People look into you're profiles and if you did not apply you're points in the passe they will not want to help you out,some will but most wont.

A small help how to get fast help.

And for you're question you should upgrade to 5.1 it will also help out in DST.

Daniel

Re: HP SIM 4.2 -SP2

Alfred Aragon — Tue, 13 Mar 2007 10:31:18 GMT

Daniel- Thanks for that tip. You have been rewarded. :)

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Tue, 13 Mar 2007 10:39:32 GMT

Did you try to reboot you're server?

Re: HP SIM 4.2 -SP2

Alfred Aragon — Tue, 13 Mar 2007 10:40:42 GMT

We can not upgrade at this time. Is there an alternate solution for this problem? It was working fine yesterday.

Re: HP SIM 4.2 -SP2

Alfred Aragon — Tue, 13 Mar 2007 11:03:01 GMT

Yes. But still no luck. I have also stopped the HP Insight Manager Service. Then I ran the mxconfigrepo -f command. Restarted SIM. But still no luck.

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Wed, 14 Mar 2007 10:13:42 GMT

Try to redisvore them for fun!?

Just to see what happens

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Thu, 15 Mar 2007 12:22:17 GMT

So?

Re: HP SIM 4.2 -SP2

Alfred Aragon — Thu, 15 Mar 2007 13:21:08 GMT

How would I rediscover them? Not too familiar with SIM.

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Fri, 16 Mar 2007 09:25:32 GMT

No problem, you go to the MENU of SIM section OPTION>DISCOVERY> you will get a page and then you have the choice on top of AUTOMATIQUE_MANUEL_HOSTS FILES,you should be good at the first section AUTOMATIC, there should be bouton RUN NOW it should discovered all you system, you may have to look in the EDIT bouton to see if you're are set to discovere you range of ip addresse

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Fri, 16 Mar 2007 09:28:59 GMT

Oh yes if you have to programme it put it this way
10.10.1.1-10.10.1.254
131.195.3.1-131.195.3.254
ect...
for all you're range if you only have then that ok only one will do,if you have more then one do them all, even if you get a message of error, it will work fine i have over 4000 with a message if being to much but it work fine

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Fri, 16 Mar 2007 09:30:03 GMT

Scheduling once a week should be fine max.

Re: HP SIM 4.2 -SP2

Alfred Aragon — Fri, 16 Mar 2007 11:07:44 GMT

We discover servers manually. How can I export or save all the servers I currently have discovered?

Re: HP SIM 4.2 -SP2

Daniel Leblanc — Fri, 16 Mar 2007 11:17:41 GMT

You will not lose the server you already have found,the new ones will add on to that liste

Re: HP SIM 4.2 -SP2

Alfred Aragon — Fri, 16 Mar 2007 11:30:55 GMT

Servers only get added if a Change Management is submitted. So I can not add servers that do not have a CM submitted to add the server to SIM. I would only like to rediscover the ones I currently have discovered.