https://community.hpe.com/t5/server-management-systems/version-control-shows-driver-out-of-date-for-non-existant-hw/m-p/4003270#M27508 Version Control shows in a warning state because it indicates that certain drivers are out-of-date. If I attempt to update the drivers, the update fails because, accourding to the log, the update was for hardware not found in the server. This is actually correct. The driver in question is listed as "HP StorageWorks Fibre Channel Array Notification Driver for Windows Server 2003. Current version is 5.30.0.32 with latest version listed as 6.0.0.32. It fails to update with the following message in the log. "The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't<BR />apply to this system." <BR />So is it possible to remove the reference to this software so that Version Control is not in an alarm state? Fri, 18 May 2007 23:30:55 GMT John Ferrell 2007-05-18T23:30:55Z https://community.hpe.com/t5/server-management-systems/version-control-shows-driver-out-of-date-for-non-existant-hw/m-p/4003270#M27508 Version Control shows in a warning state because it indicates that certain drivers are out-of-date. If I attempt to update the drivers, the update fails because, accourding to the log, the update was for hardware not found in the server. This is actually correct. The driver in question is listed as "HP StorageWorks Fibre Channel Array Notification Driver for Windows Server 2003. Current version is 5.30.0.32 with latest version listed as 6.0.0.32. It fails to update with the following message in the log. "The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't<BR />apply to this system." <BR />So is it possible to remove the reference to this software so that Version Control is not in an alarm state? Fri, 18 May 2007 23:30:55 GMT https://community.hpe.com/t5/server-management-systems/version-control-shows-driver-out-of-date-for-non-existant-hw/m-p/4003270#M27508 John Ferrell 2007-05-18T23:30:55Z https://community.hpe.com/t5/server-management-systems/version-control-shows-driver-out-of-date-for-non-existant-hw/m-p/4003271#M27509 You might want to look at:<BR /><A href="http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127033" target="_blank">http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127033</A><BR /> Sat, 19 May 2007 02:47:00 GMT https://community.hpe.com/t5/server-management-systems/version-control-shows-driver-out-of-date-for-non-existant-hw/m-p/4003271#M27509 Rob Buxton 2007-05-19T02:47:00Z