topic Re: wrong disk performance values in PMP in Server Management - Systems Insight Manager

wrong disk performance values in PMP

cscherb — Thu, 31 May 2007 16:03:26 GMT

Performance Management Pack is showing a realy large average values for "Millisec/Read" , "Millisec/Write" and "Queue Length". I'm quite shure that these vaules must be wrong - performance monitor in Windows Server 2003 is showing minimal disk activity and visible control on the server looking at the leds confirms this. Did anybody experience a similar problem ?

Re: wrong disk performance values in PMP

pkrai — Fri, 01 Jun 2007 00:10:27 GMT

Because all such performance values are dependent on Management Agents, can you please verify the Agent version & check whether Agent is working fine on the given system ?

Thanks.

Re: wrong disk performance values in PMP

cscherb — Fri, 01 Jun 2007 01:14:04 GMT

Agent Version is 7.40.0.0 - I will apply the latest Version (7.8) and see if the problem persists.

Re: wrong disk performance values in PMP

Renato Richina — Fri, 01 Jun 2007 02:14:44 GMT

Hi

I have the same issue, see post http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1131270

Regards
Renato

Re: wrong disk performance values in PMP

cscherb — Fri, 01 Jun 2007 03:08:37 GMT

In my case the Servers are runnig "Microsoft Windows Server 2003, Standard Edition Service Pack 1" and "Microsoft Windows Server 2003, Enterprise Edition Service Pack 1". In my point of view this seems not to be an issue with SP2 for Windows Server 2003.