topic Re: Using SIM 5.1 with Netware 6.5 in Server Management - Systems Insight Manager

Using SIM 5.1 with Netware 6.5

davegCPS — Tue, 12 Jun 2007 07:40:11 GMT

I am having trouble getting the configuration right for monitoring my Novell servers. At present, I can see the servers in SIM and get inventory information, but the SMNP traps do not appear to work correctly. I get no monitoring information back (ie: failed power supply etc)
Is anyone familar enough with Novell 6.5 and the SIM agents to give me a hand?
I've tried talking to HP and I get no where, its like the support is non-existant for this product.

Re: Using SIM 5.1 with Netware 6.5

Steven Baillie — Thu, 14 Jun 2007 04:06:43 GMT

have you installed the latest PSP for netware.
have you configured the SNMP community strings.

have you got about 10 cpq* modules loaded.

I have 2 netware 6.5 server reporting a failed power supply. (power cable removed)it does work.

steven

Re: Using SIM 5.1 with Netware 6.5

Lars Nilsson_1 — Tue, 19 Jun 2007 01:54:55 GMT

Have you added your SIM server IP-address to \SYS\ETC\Traptarg.cfg on the NetWare server?

Should look something like this:

Protocol UDP
127.0.0.1 # send traps to the loopback address
xxx.xxx.xxx.xxx # send traps to your HP SIM server