SIM to monitor services in RedHat Linux managed systems.

Monitoring services in — Thu, 26 Jul 2007 14:03:35 GMT

Does anyone know: Using HP SIM, how can set up so each time a service is down (e.g. httpd, xinetd, or so), SIM will send me an email to alert?

I saw some recommendations about setting SNMP trap but I was not sure how I can set it up and make it work for me. Or, different method has to be setup to make it work.

Thanks.

Re: SIM to monitor services in RedHat Linux managed systems.

James ~ Happy Dude — Fri, 27 Jul 2007 05:24:40 GMT

Refer :
h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/hpsim_userGuide.pdf
Page 55 onwards.

Re: SIM to monitor services in RedHat Linux managed systems.

fred Passeron — Tue, 31 Jul 2007 04:26:31 GMT

hi

A quick look at the snmpd.conf file should help you for there is a dedicated section of it for monitoring processes : ###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.

#
# Examples (commented out by default):
#

# Make sure mountd is running
#proc mountd

# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4

# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1

# A snmpwalk of the process mib tree would look something like this:
#
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an rpc.mountd is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the snmpd.conf file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.

Give it a look and a try !

hope it helps

fred

topic Re: SIM to monitor services in RedHat Linux managed systems. in Server Management - Systems Insight Manager

SIM to monitor services in RedHat Linux managed systems.

Re: SIM to monitor services in RedHat Linux managed systems.

Re: SIM to monitor services in RedHat Linux managed systems.