topic Re: Thermal Status OK in Server Management - Systems Insight Manager

Thermal Status OK

WendyR — Mon, 15 Oct 2007 10:22:06 GMT

Hi
I have 2 NetWare servers that are sending alerts every couple of minutes to my HP SIM CMS server. The alert says "Thermal Status OK". If these alerts keep coming every few minutes my SIM database is going to grow very large. I have 40+ other NetWare servers that aren't sending that message repetitively.

Any ideas how I can get these 2 NetWare servers to stop sending this "Thermal Status OK" message over and over?

Thanks for your help..

Re: Thermal Status OK

WendyR — Mon, 22 Oct 2007 08:46:38 GMT

Can someone please help? These events are filling up the database..

Thank you..

Re: Thermal Status OK

Eugene Marko — Mon, 22 Oct 2007 09:37:39 GMT

Hello,

Dirty & quick method to filter out these messages:
Options -> Events -> SNMP Trap settings
And put
Enable Trap Handling: No
for desired event.
Then you'll have time to fix it from servers side and database will stop growing.

Anyway this is problem not of SIM server, but agent - you should look carefully on it's settings.

Regards,
Eugene Marko.

Re: Thermal Status OK

WendyR — Tue, 23 Oct 2007 15:24:30 GMT

Thank you so much! I was able to temporarily turn off that alert so the database stops filling up.

Does anyone have any idea how to figure out why these 2 netware agents are sending this infomational message every few minutes?