https://community.hpe.com/t5/server-management-systems/cim-7-sp2/m-p/3279816#M3038 I don't think that's possible using the generic IM reports.<BR />But the new HPSIM reports a G2 a bit differently and does include the Empty slots. Unfortunately it doesn't seem to make too good a job of the G1 Display, there seems to be some additional "Empty" Lines.<BR />I've only tested this on DL360 G1 &amp; G2 but it should be similar for a 380. Tue, 18 May 2004 15:56:00 GMT Rob Buxton 2004-05-18T15:56:00Z https://community.hpe.com/t5/server-management-systems/cim-7-sp2/m-p/3279815#M3037 All,<BR /><BR />When querying the CIM 7 database, I am finding inconsistencies with regard to server models. If I query the expansion slots on the Proliant DL380 models, the G1 series returns information on every slot -- even the empty ones. The G2 and G3 series do not return a "Slot x ........ [empty]" for the expansion slots that are truly empty. Is there any way I can convince CIM 7 (or the G2 and G3 series) to return that info to the CIM database? I hate having to check the Survey.TXT on all G2 and G3 series. Thanks. Tue, 18 May 2004 12:18:53 GMT https://community.hpe.com/t5/server-management-systems/cim-7-sp2/m-p/3279815#M3037 Robert Berrie 2004-05-18T12:18:53Z https://community.hpe.com/t5/server-management-systems/cim-7-sp2/m-p/3279816#M3038 I don't think that's possible using the generic IM reports.<BR />But the new HPSIM reports a G2 a bit differently and does include the Empty slots. Unfortunately it doesn't seem to make too good a job of the G1 Display, there seems to be some additional "Empty" Lines.<BR />I've only tested this on DL360 G1 &amp; G2 but it should be similar for a 380. Tue, 18 May 2004 15:56:00 GMT https://community.hpe.com/t5/server-management-systems/cim-7-sp2/m-p/3279816#M3038 Rob Buxton 2004-05-18T15:56:00Z