topic Re: Integrated Management Log in Server Management - Systems Insight Manager

Integrated Management Log

CCyre — Wed, 19 Dec 2007 14:09:10 GMT

In SIM I cannot select any events and clear them or mark them repaired. In the Integrated Management log viewer on the actual server, I can. What gives?

Re: Integrated Management Log

Rob Buxton — Wed, 19 Dec 2007 21:38:27 GMT

You can check that "Sets" are enabled in the HP Agent from the SMH.
Or you can see this from the HP Management Agents GUI.

Re: Integrated Management Log

CCyre — Wed, 19 Dec 2007 21:59:22 GMT

SNMP Sets is enabled and its a no go, I can't see where you set it in system management home page but I can see it in the insight management agent gui from control panel.

Re: Integrated Management Log

Rob Buxton — Wed, 19 Dec 2007 23:14:31 GMT

From the SMH go to the Settings Tab, under the SNMP Web Agent Tab you should see an option to Enable Sets.
Under Security in the left hand column you should also be able to add a Read/Write community name. HPSIM should use this to do the set itself I believe.