https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130981#M30936 How are you determining that the VCA is not configured with your password?<BR /><BR />-Rich Thu, 17 Jan 2008 19:23:23 GMT Rich Purvis 2008-01-17T19:23:23Z https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130980#M30935 I have configured the 7.91A support pack with the required settings for the Version Control Agent. However when I push the support pack out from the insight homepage, it completes fine but hte VCA on the server is not configured with the specified password? Thu, 17 Jan 2008 11:25:59 GMT https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130980#M30935 Stuart Mueller 2008-01-17T11:25:59Z https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130981#M30936 How are you determining that the VCA is not configured with your password?<BR /><BR />-Rich Thu, 17 Jan 2008 19:23:23 GMT https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130981#M30936 Rich Purvis 2008-01-17T19:23:23Z https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130982#M30937 Thanks for the reply<BR /><BR />Within the pack I have configure the VCA with a particualr username and password.<BR /><BR />When I check on a server that I have pushed the pack out to, within the VCA on the system management homepage, there is no pack specified. I then click to change agent settings and there is no password specified, however there is a username and server.<BR /><BR />I can replicate the settings of the vca from another server after the pack has gone out fine, but would like to do it while pushing the pack out. Fri, 18 Jan 2008 08:37:28 GMT https://community.hpe.com/t5/server-management-systems/pushing-proliant-support-pack/m-p/4130982#M30937 Stuart Mueller 2008-01-18T08:37:28Z