topic Re: Management Processor does not appear on SMH for server in Server Management - Systems Insight Manager

Management Processor does not appear on SMH for server

DEJones_1 — Fri, 25 Jan 2008 15:45:14 GMT

I have over 1600 servers to manage. Most will display both the Management Processor information and the iLO link on the left margin, but a few will display neither. Updating the PSP version on the server has no affect. My thought is that it might be a firmware version issue. Does anyone have any ideas on this?

Thanks
DJinVA

Re: Management Processor does not appear on SMH for server

David Claypool — Fri, 25 Jan 2008 16:04:48 GMT

The cause almost universally is a non-installed or problematic iLO driver. Investigate a couple of these machines for the iLO driver by checking Device Manager.

Re: Management Processor does not appear on SMH for server

DEJones_1 — Fri, 25 Jan 2008 18:58:19 GMT

I have checked two different servers and both are showing a listing for a Multifunction Adapter with HP ILO Management Channel Interface Driver installed. Under System Devices I see HP Proliant iLO Advanced Management Controllers. Still no reference to the iLO or MP on the SMH.

Thanks

Re: Management Processor does not appear on SMH for server

Mi6t0 — Mon, 28 Jan 2008 19:31:06 GMT

Are you sure, that the SNMP service is properly configured? Set the private rights to "read/create" and the public to read only.

And as you mentioned multifunction drivers, that means G4 (500) or G5 servers so - check what happens with the 1.43 ilo firmware.

Regards,

Re: Management Processor does not appear on SMH for server

DEJones_1 — Thu, 14 Feb 2008 14:54:41 GMT

I have checked the SNMP settings and they are consistent across all servers. In some respects, firmware would be a logical assumption, but when you look at the issue, this affects multiple servers of multiple generations but not all in the same generation.

Thanks for your repsonse.

Dennis