Problem with Brocade SMI

stefano colombo_1 — Tue, 05 Feb 2008 11:49:58 GMT

I'm trying to use the Brocade's SMI-S with SIM 05.01.00.02 .
I Installed the brocade SMI agent on the SIM server .

Then I tried an "identify system"
but got the following message
" This system does not have any SMI-S CIMOM installed
This system has a server CIMOM installed "

I tested the SMI port with the command
wbemdisco host 5988 interop user password

and got the following output

D:\HPSIM\Systems Insight Manager>echo off
WbemDisco 01.00.01
------------------
HOST = gdbo01mgt
PORT = 5988
NAMESP = interop
USER = administrator
PASSWD = *****
Connect to gdbo01mgt in namespace interop with SSL=false

ObjectManager.Name=WBEM Solutions:1202144378648
ElementName=WBEM Solutions J WBEM Server
CimomVersion=
Description=WBEM Solutions J WBEM Server

Enumerating instances of CIM_RegisteredProfile...

Profile.RegisteredName=SMI-S
RegisteredVersion=1.2.0
ProviderVersion=
Profile.RegisteredName=Ethernet Port
RegisteredVersion=1.0.0
ProviderVersion=
Profile.RegisteredName=Switch
RegisteredVersion=1.2.0
ProviderVersion=
SubProfile.RegisteredName=Blades
SubProfile.RegisteredName=Access Points
SubProfile.RegisteredName=Software Installation Service
SubProfile.RegisteredName=Software
Profile.RegisteredName=Fan
RegisteredVersion=1.0.0
ProviderVersion=
Profile.RegisteredName=FC HBA
RegisteredVersion=1.2.0
ProviderVersion=
Profile.RegisteredName=Fabric
RegisteredVersion=1.2.0
ProviderVersion=
SubProfile.RegisteredName=Enhanced Zoning and Enhanced Zoning Control
SubProfile.RegisteredName=Zone Control
SubProfile.RegisteredName=FDMI
SubProfile.RegisteredName=Fibre Channel Security
SubProfile.RegisteredName=Fabric Path Performance
Profile.RegisteredName=Sensors
RegisteredVersion=1.0.0
ProviderVersion=
Profile.RegisteredName=iSCSI To FC Gateway
RegisteredVersion=1.2.0
ProviderVersion=
SubProfile.RegisteredName=FC Initiator Ports
SubProfile.RegisteredName=iSCSI Target Ports
Profile.RegisteredName=Power Supply
RegisteredVersion=1.0.0
ProviderVersion=
Profile.RegisteredName=IP Interface
RegisteredVersion=1.0.0a
ProviderVersion=
Profile.RegisteredName=Extender
RegisteredVersion=1.2.0
ProviderVersion=
Profile.RegisteredName=Server
RegisteredVersion=1.0.3
ProviderVersion=
SubProfile.RegisteredName=Object Manager Adapter
Profile.RegisteredName=Server
RegisteredVersion=1.1.0
ProviderVersion=
SubProfile.RegisteredName=Object Manager Adapter
SubProfile.RegisteredName=Indication
Profile.RegisteredName=Server
RegisteredVersion=1.2.0
ProviderVersion=
SubProfile.RegisteredName=Object Manager Adapter
SubProfile.RegisteredName=Indication
SubProfile.RegisteredName=Profile Registration Profile

so I understand that it connects properly
Has anyone an idea of what can be the problem ?
Thanks

Re: Problem with Brocade SMI

Neal Bowman — Mon, 11 Feb 2008 18:58:35 GMT

Stefano,

from the looks of your results, your SIM server is not the device that is attached to the Brocade device. I think this software needs to be installed onto one server that has a fiber adapter that is connected to your Brocade switch.

hope this helps,

Neal

Re: Problem with Brocade SMI

stefano colombo_1 — Mon, 11 Feb 2008 20:16:59 GMT

Hi ,
it's not the way it works. The SMI agent for brocade connects to the switch vie network ( telnet/ssh) not by FC

Re: Problem with Brocade SMI

Neal Bowman — Mon, 11 Feb 2008 20:30:38 GMT

Sorry about that. I did find a short white paper that I think is describing the scenario you are looking for. Look over http://h20331.www2.hp.com/ERC/downloads/4AA1-2845ENW.pdf if you have not already done so.

Neal

topic Problem with Brocade SMI in Server Management - Systems Insight Manager

Problem with Brocade SMI

Re: Problem with Brocade SMI

Re: Problem with Brocade SMI

Re: Problem with Brocade SMI