topic Re: Home -> System Config -> Autorecovery in Server Management - Systems Insight Manager

Home -> System Config -> Autorecovery

CCyre — Thu, 07 Feb 2008 14:53:07 GMT

I cleared the ASR but this still shows yellow in the HW column of the all systems view for this server. What else is there to do to make it green again? Thanks

Re: Home -> System Config -> Autorecovery

Daniel Leblanc — Fri, 08 Feb 2008 14:04:15 GMT

Try a DATA COLLECTION,if thta doesn't work STATUS POLLING>HARDWARE POLLING.

this would clear it for me.

Daniel

PS:Don't ferget to apply you're points,ty

Re: Home -> System Config -> Autorecovery

CCyre — Fri, 08 Feb 2008 14:11:06 GMT

No go still yellow after both suggestions. Could it be something else needs to be enabled somewhere? IE sets needed to be enabled and snmp set to read/write in order to mark as resolved the IML Logs

Re: Home -> System Config -> Autorecovery

Daniel Leblanc — Fri, 08 Feb 2008 14:12:39 GMT

That for sure..need to be read/write or Read/Creat

Re: Home -> System Config -> Autorecovery

CCyre — Fri, 08 Feb 2008 14:31:01 GMT

Well thats already in place, I was wondering if ASR clearing needed something similar somewhere else.

Re: Home -> System Config -> Autorecovery

Daniel Leblanc — Fri, 08 Feb 2008 14:32:00 GMT

No i don't think so!