https://community.hpe.com/t5/server-management-systems/vca-trust-problem/m-p/4145748#M31373 Two things are required before the VCA/VCRM function works. One is the trust between HPSIM and client server and then the credentials to the VCRM itself need to be configured.<BR /><BR />As has been mentioned before sometimes the trust Cert gets corrupted, try deleting and reimporting from the HPSIM page. Once the trust is working rerun the SW Polling task. Sun, 17 Feb 2008 23:36:34 GMT Rob Buxton 2008-02-17T23:36:34Z https://community.hpe.com/t5/server-management-systems/vca-trust-problem/m-p/4145747#M31372 Hi,<BR /><BR />On the "System" page of several servers, when I select "Software Status", I received this error message : Be sure that a trust relationship exists between the HP Systems Insight Manager and Version Control Agent on the target system<BR /><BR />In the Security settings of these servers (through "Health Status" link) :<BR />Secure Trust Modes &gt; Trust by Certificate &gt; Trusted certificate : Server Insight<BR /><BR />On others servers, no problem.<BR /><BR />Thanks for your help Fri, 15 Feb 2008 13:13:37 GMT https://community.hpe.com/t5/server-management-systems/vca-trust-problem/m-p/4145747#M31372 SIT 2008-02-15T13:13:37Z https://community.hpe.com/t5/server-management-systems/vca-trust-problem/m-p/4145748#M31373 Two things are required before the VCA/VCRM function works. One is the trust between HPSIM and client server and then the credentials to the VCRM itself need to be configured.<BR /><BR />As has been mentioned before sometimes the trust Cert gets corrupted, try deleting and reimporting from the HPSIM page. Once the trust is working rerun the SW Polling task. Sun, 17 Feb 2008 23:36:34 GMT https://community.hpe.com/t5/server-management-systems/vca-trust-problem/m-p/4145748#M31373 Rob Buxton 2008-02-17T23:36:34Z