https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172736#M32418 did u try that? Wed, 09 Apr 2008 03:50:30 GMT Change_happens 2008-04-09T03:50:30Z https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172734#M32416 Hi all,<BR />Have recently installed the PSP version 7.60 onto a Proliant ML370 G2 on CentOS 4. After updating CentOS, cpqacuxe does not start automatically. At present, hpasm and hpsmh both appear to be working fine but there is no sign of the Array Configuration Utility link within the SMH.<BR /><BR />If I try "cpqacuxe -R" on the command line, it starts without errors and from there I can access and use the utility from within the SMH. <BR /><BR />How is the utility meant to start and how do I make it do so?<BR /><BR />Thanks in advance,<BR />Chris Wed, 02 Apr 2008 16:24:02 GMT https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172734#M32416 chris0192 2008-04-02T16:24:02Z https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172735#M32417 i think PSP7.6 is quiet old. try 7.91 or 8.0? Thu, 03 Apr 2008 14:51:37 GMT https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172735#M32417 Change_happens 2008-04-03T14:51:37Z https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172736#M32418 did u try that? Wed, 09 Apr 2008 03:50:30 GMT https://community.hpe.com/t5/server-management-systems/cpqacuxe-fails-to-start-on-system-bootup/m-p/4172736#M32418 Change_happens 2008-04-09T03:50:30Z