https://community.hpe.com/t5/server-management-systems/sim-to-ovow-event-forwarding/m-p/4176213#M32554 We have SIM 5.1 and OVOW 7.5 installed and integrated in our env. SIM forwards all Hardware messages to the OVOW. Each time our storage (EVA400) forward events to the SIM and then over to the OVOW message browser, the details gets chopped (no filters are used). In this case, each time when we pull the hard drive out from our storage to test the event, it forward full event with details to the SIM. However, when this event appear in the OVOW browser it does not tell us which drive (no.) has failed. but, when I go back and look at event details in the SIM, all the details are present in the SIM. Please advice. Tue, 08 Apr 2008 16:33:01 GMT gurmit malhi 2008-04-08T16:33:01Z https://community.hpe.com/t5/server-management-systems/sim-to-ovow-event-forwarding/m-p/4176213#M32554 We have SIM 5.1 and OVOW 7.5 installed and integrated in our env. SIM forwards all Hardware messages to the OVOW. Each time our storage (EVA400) forward events to the SIM and then over to the OVOW message browser, the details gets chopped (no filters are used). In this case, each time when we pull the hard drive out from our storage to test the event, it forward full event with details to the SIM. However, when this event appear in the OVOW browser it does not tell us which drive (no.) has failed. but, when I go back and look at event details in the SIM, all the details are present in the SIM. Please advice. Tue, 08 Apr 2008 16:33:01 GMT https://community.hpe.com/t5/server-management-systems/sim-to-ovow-event-forwarding/m-p/4176213#M32554 gurmit malhi 2008-04-08T16:33:01Z