https://community.hpe.com/t5/server-management-systems/hp-sim-5-1-automatic-event-handling-2-smtp-server/m-p/4179633#M32663 hello,<BR />i'm using HP SIM to monitor three HP ProLiant systems. Most of the time everything is fine. One problem:<BR />We have a SMTP-Server running (which is not provided by myself, but the information center), which i use to send emails as an automatic event handler. This SMTP-Server is sometimes a bit shaky. If HP SIM is sending an email at that time, SIM does not recognize when the SMTP-Server is available again. Although SMTP is available again, all following mails are qeued, but not send :-(. So my Hardwaremonitoring is not working any longer. Is there a away to configure SIM that it recognize running SMTP-Service again ? Or can i configure a second SMTP-Server, which SIM takes if the first one is not available ?<BR />Thanks, Bernd Mon, 14 Apr 2008 14:56:38 GMT Lentes 2008-04-14T14:56:38Z https://community.hpe.com/t5/server-management-systems/hp-sim-5-1-automatic-event-handling-2-smtp-server/m-p/4179633#M32663 hello,<BR />i'm using HP SIM to monitor three HP ProLiant systems. Most of the time everything is fine. One problem:<BR />We have a SMTP-Server running (which is not provided by myself, but the information center), which i use to send emails as an automatic event handler. This SMTP-Server is sometimes a bit shaky. If HP SIM is sending an email at that time, SIM does not recognize when the SMTP-Server is available again. Although SMTP is available again, all following mails are qeued, but not send :-(. So my Hardwaremonitoring is not working any longer. Is there a away to configure SIM that it recognize running SMTP-Service again ? Or can i configure a second SMTP-Server, which SIM takes if the first one is not available ?<BR />Thanks, Bernd Mon, 14 Apr 2008 14:56:38 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-5-1-automatic-event-handling-2-smtp-server/m-p/4179633#M32663 Lentes 2008-04-14T14:56:38Z