topic How to integrate command view with SIM 5.2 in Server Management - Systems Insight Manager

How to integrate command view with SIM 5.2

Usman Sharif — Thu, 01 May 2008 22:56:18 GMT

Anyone can tell me how to perform these steps in order to integrate command view 6 with SIM 5.2
========================================
1.
Add user to CIMOM on the system where SMI-S is installed.
2.
Add read and write authorization for cimuser for root/pg_interop namespace, on the system where SMI-S is installed.
3.
Import SMI-s certificate on SIM trusted certificate list.
==================================

Re: How to integrate command view with SIM 5.2

Rob Buxton — Thu, 01 May 2008 23:16:01 GMT

You can just use the default credentials you entered when the SMI-S component was installed. But if you want to manage users then check out the CIMUser command.

For HPSIM to see CV EVA it uses the server CV EVA is installed on. Add the credentials above into the WBEM server specific protocol settings. Also ensure wbem is enabled globally - doesn't need credentials there.

I've not done anything with certificates. I'm not sure that's possible.