topic Re: RIB/RILOE not showing as "in Server" in Server Management - Systems Insight Manager

RIB/RILOE not showing as "in Server"

Dan Robinson_4 — Thu, 03 Jun 2004 21:31:36 GMT

Some of my RIB/RILOE/iLOs are linking themselves to their servers, and some arent.

Does anyone have a checklist of some sort to figure out why some arent auto linking properly?

I dont suppose there is a manual way of linking the two either, is there?

Re: RIB/RILOE not showing as "in Server"

Brian Kleeman — Thu, 10 Jun 2004 08:00:53 GMT

I am experiencing the same problem. I have reinstalled all agents and upgraded all RIB/RILOE. Any one have any other suggestions?

Re: RIB/RILOE not showing as "in Server"

David Claypool — Thu, 10 Jun 2004 11:53:59 GMT

Make sure that the "SNMP/Insight Manager" setting is set to 'high.' hpSIM/IM7 uses this to make the association. One of the elements of the response is the server serial number which is matched to the GUID/Index of the server in the database. If the two don't match, no association.

A common occurence is having a MB replacement and not programming a serial number in the new board.

Re: RIB/RILOE not showing as "in Server"

Brian Kleeman — Thu, 10 Jun 2004 12:18:55 GMT

Where is that setting? Is it on the servers that are being monitored or the SIM server.

Thanks.

Brian

Re: RIB/RILOE not showing as "in Server"

David Claypool — Thu, 10 Jun 2004 13:11:01 GMT

It's under the 'Administration' tab in the iLO UI.

Re: RIB/RILOE not showing as "in Server"

Magoo — Tue, 22 Jun 2004 03:03:08 GMT

...for the iLo thats true. What about the RILOEs? Do the they also have a comparable setting?

Thanks