topic Re: SIM is not reporting the Hardware Inventory in Server Management - Systems Insight Manager

SIM is not reporting the Hardware Inventory

John William Polonio — Thu, 15 May 2008 01:22:07 GMT

Hi,

I was able to successfully installed the SIM in one of my server, apparently I tried to get the Hardware information yet It gives me the following errors

The device does not have any supported instrumentation.

Please advice how can I get correct this error.

Thank you

Re: SIM is not reporting the Hardware Inventory

Change_happens — Thu, 15 May 2008 03:03:43 GMT

What is that server model? Is that properly identified in SIM as correct product model and proper information on system page?

Re: SIM is not reporting the Hardware Inventory

John William Polonio — Thu, 15 May 2008 03:13:11 GMT

Hi,

I have a ML570 G3, DL380 G3, G4, G5.

How will I know if SIM recognizes this as a correct model.

Please Advice?

Re: SIM is not reporting the Hardware Inventory

Change_happens — Fri, 16 May 2008 03:52:01 GMT

Hi When you discover it in SIM by IP Address/DNS Name Go to that device page it will show you Name/IP, serial number and then expand product description it will show all details like model, OS and other.
Hope you will figure out n reply soon.

Re: SIM is not reporting the Hardware Inventory

John William Polonio — Fri, 16 May 2008 04:36:09 GMT

I actually did that, but at first it will show unconfigured HP for the OS it will say embedded, so i change those with like HP Server for OS i change it to Windows, for serial numbers I am hoping it will be discovered. yet it does not so what i did is to entered it manually.

For more info, the account that i am using is the administrator account of each of the server. I dont know if there is related.

I hope we can figure this out.

Thank you

Re: SIM is not reporting the Hardware Inventory

Change_happens — Fri, 16 May 2008 04:57:24 GMT

You don't need to enter anything there manually. it should recognize everything fine. Is it recognizing Model Name of blades fine?