https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210462#M33438 Thanks for the reply. Yes I do have configured the SNMP on all the servers and is able to recieve the notification, if the server is not availble or rebooted . But I want to know how can I monitor when the HD gets faulty .. or Power supply.. May be I did not configured the HP Insight manager properly.<BR /><BR />Thanks in advance. Thu, 05 Jun 2008 14:01:59 GMT kajal 2008-06-05T14:01:59Z https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210460#M33436 I want to monitor the harddisk failure on servers using HP Insight manager,I know there is one harddisk failure on one of my servers which is shwoing Red X on the HD but I am not reciving any notifications and Health status is showing green on HP insight manager. Could anyone be little helpful .. Pls Wed, 04 Jun 2008 11:14:25 GMT https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210460#M33436 kajal 2008-06-04T11:14:25Z https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210461#M33437 And You have the Insight Agents installed and running in the monitored server ? You have configured the SNMP on the monitored server ? Thu, 05 Jun 2008 10:29:38 GMT https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210461#M33437 JKytsi 2008-06-05T10:29:38Z https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210462#M33438 Thanks for the reply. Yes I do have configured the SNMP on all the servers and is able to recieve the notification, if the server is not availble or rebooted . But I want to know how can I monitor when the HD gets faulty .. or Power supply.. May be I did not configured the HP Insight manager properly.<BR /><BR />Thanks in advance. Thu, 05 Jun 2008 14:01:59 GMT https://community.hpe.com/t5/server-management-systems/problems-in-adding/m-p/4210462#M33438 kajal 2008-06-05T14:01:59Z