https://community.hpe.com/t5/server-management-systems/virtual-interface-1-on-system-management-homepage/m-p/4232301#M33903 No fix, but I have the same problem. Tested upgrade of PSP from 7.91 to 8.10 on a Proliant DL380G5.<BR /><BR />I've also upgraded the NIC drivers, NCU and SMH to latest available (newer than PSP) still with no luck.<BR /><BR />Looks like a roll back is in order. Wed, 16 Jul 2008 14:22:03 GMT SysAdminGuy 2008-07-16T14:22:03Z https://community.hpe.com/t5/server-management-systems/virtual-interface-1-on-system-management-homepage/m-p/4232300#M33902 Hi,<BR />after installing Proliant Support Pack 8.10 the System Management Homepage shows for NICs only a Virtual interface 1. I miss my NIC Team with the two Gigabit Server Adapter. (With previous Proliant Support Pack 7.91 anything works fine)<BR />Any solution?<BR />Thanks Fri, 11 Jul 2008 18:30:48 GMT https://community.hpe.com/t5/server-management-systems/virtual-interface-1-on-system-management-homepage/m-p/4232300#M33902 hpfan_1 2008-07-11T18:30:48Z https://community.hpe.com/t5/server-management-systems/virtual-interface-1-on-system-management-homepage/m-p/4232301#M33903 No fix, but I have the same problem. Tested upgrade of PSP from 7.91 to 8.10 on a Proliant DL380G5.<BR /><BR />I've also upgraded the NIC drivers, NCU and SMH to latest available (newer than PSP) still with no luck.<BR /><BR />Looks like a roll back is in order. Wed, 16 Jul 2008 14:22:03 GMT https://community.hpe.com/t5/server-management-systems/virtual-interface-1-on-system-management-homepage/m-p/4232301#M33903 SysAdminGuy 2008-07-16T14:22:03Z