https://community.hpe.com/t5/server-management-systems/reporting-on-hba-information/m-p/4235828#M33983 I am trying to run a report to get all HBA info from our servers (WWN, Firmware etc.). I am aware i can get this info from the SMH but I have too many servers to do this on an individual basis. <BR /><BR />When running a report on Storage, report comes back saying "No Data Available". Is there somewhere I can configure the data collection to gather this info? Thu, 17 Jul 2008 13:57:41 GMT seanchannon 2008-07-17T13:57:41Z https://community.hpe.com/t5/server-management-systems/reporting-on-hba-information/m-p/4235828#M33983 I am trying to run a report to get all HBA info from our servers (WWN, Firmware etc.). I am aware i can get this info from the SMH but I have too many servers to do this on an individual basis. <BR /><BR />When running a report on Storage, report comes back saying "No Data Available". Is there somewhere I can configure the data collection to gather this info? Thu, 17 Jul 2008 13:57:41 GMT https://community.hpe.com/t5/server-management-systems/reporting-on-hba-information/m-p/4235828#M33983 seanchannon 2008-07-17T13:57:41Z https://community.hpe.com/t5/server-management-systems/reporting-on-hba-information/m-p/4235829#M33984 HPSIM isn't the best at this, you can get better reporting using SAN reporting tools. I also use HPCC. You do need to be able to send the created files to HP, but you get back a complete set of web reports that provides a lot of this detail. Sun, 20 Jul 2008 19:47:07 GMT https://community.hpe.com/t5/server-management-systems/reporting-on-hba-information/m-p/4235829#M33984 Rob Buxton 2008-07-20T19:47:07Z