https://community.hpe.com/t5/server-management-systems/mixed-up-trap-severity/m-p/4291234#M34937 After upgrading to SIM C.05.02.02.00 (SuSE Linux) it seems like the event severity on certain traps have been mixed up.<BR /><BR />For example:<BR /><BR />A physical drive fails and SIM reports:<BR /><BR />(SNMP) Physical Drive Status Change (3046) with Physical Drive Status = Failed.<BR />The Event Severity says Informational.<BR /><BR />When the failed drive is replaced you get the same trap but now with Physical Drive Status = OK.<BR />This event says Event Severity = Critical.<BR /><BR />I don't think this is the way it's ment to be...<BR /><BR />Has anyone seen something similar and any suggestions?<BR /> Tue, 21 Oct 2008 14:15:03 GMT Lars Nilsson_1 2008-10-21T14:15:03Z https://community.hpe.com/t5/server-management-systems/mixed-up-trap-severity/m-p/4291234#M34937 After upgrading to SIM C.05.02.02.00 (SuSE Linux) it seems like the event severity on certain traps have been mixed up.<BR /><BR />For example:<BR /><BR />A physical drive fails and SIM reports:<BR /><BR />(SNMP) Physical Drive Status Change (3046) with Physical Drive Status = Failed.<BR />The Event Severity says Informational.<BR /><BR />When the failed drive is replaced you get the same trap but now with Physical Drive Status = OK.<BR />This event says Event Severity = Critical.<BR /><BR />I don't think this is the way it's ment to be...<BR /><BR />Has anyone seen something similar and any suggestions?<BR /> Tue, 21 Oct 2008 14:15:03 GMT https://community.hpe.com/t5/server-management-systems/mixed-up-trap-severity/m-p/4291234#M34937 Lars Nilsson_1 2008-10-21T14:15:03Z