topic Re: Display System Name in Server Management - Systems Insight Manager

Display System Name

MaierCH — Mon, 15 Dec 2008 14:29:17 GMT

Hello,

i have the following enviroment hp sim 5.2 sp2.
I have two system they will be displayed only with the IP Adress when i select they as target systems (Deploy Firmware).

How can i fix that ???

When i look under all Server the System name where displayed.

regards

Chris

Re: Display System Name

marsh_1 — Mon, 15 Dec 2008 15:37:28 GMT

chris,

you can always change the name manually by going to options - system properties - set system properties or the system properties under tools and links if you select the systems from the all server display.

hope this helps

Re: Display System Name

MaierCH — Mon, 15 Dec 2008 15:49:14 GMT

Thanks Mark,

i will try this option this week.
and inform you aboute the effect.

best regards

Chris

Re: Display System Name

marsh_1 — Mon, 15 Dec 2008 18:16:38 GMT

chris,

make sure the "Prevent the Discovery process from changing this system name" checkbox is ticked.

good luck

Re: Display System Name

Rob Buxton — Mon, 15 Dec 2008 20:25:20 GMT

System Names are derived from DNS. It's better to fix up the DNS issue. both reverse and forward lookups need to return compatible results.

Re: Display System Name

MaierCH — Fri, 19 Dec 2008 20:09:45 GMT

thaks for help
dns was the problem.