https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341911#M35947 AFAIK I had this problem also with v5.1.<BR />You should upgrade to v5.2 SP2 if you want to play save, or wait till 26/01 until v5.3 is released. Thu, 22 Jan 2009 09:04:11 GMT Ervinck Kevin 2009-01-22T09:04:11Z https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341910#M35946 When trying to suspend monitoring on a server from tools &amp; Links you get the following errors<BR /><BR />The following error occurred.<BR /><BR />There was a problem intializing the page.<BR /><BR />HP SIM 5.1 with Sp1 Wed, 21 Jan 2009 13:26:56 GMT https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341910#M35946 james mellor_1 2009-01-21T13:26:56Z https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341911#M35947 AFAIK I had this problem also with v5.1.<BR />You should upgrade to v5.2 SP2 if you want to play save, or wait till 26/01 until v5.3 is released. Thu, 22 Jan 2009 09:04:11 GMT https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341911#M35947 Ervinck Kevin 2009-01-22T09:04:11Z https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341912#M35948 The problem is that HP Sim is clustered so the upgrade is not that simple. Would like to fix the issue with out upgrading. Thu, 22 Jan 2009 09:44:45 GMT https://community.hpe.com/t5/server-management-systems/suspend-or-resume-monitoring-in-sim/m-p/4341912#M35948 james mellor_1 2009-01-22T09:44:45Z