https://community.hpe.com/t5/server-management-systems/ilo-boards-in-im7/m-p/3307373#M3614 Insight manager is picking up the ILO boards for my servers, but when the board names are listed, they don't always have the server name associated with tehm. For example, some management Processor entries will be listed as ILO-xyz in server xyz, while other instances it will be just ILO-xyz or just the IP address. What setting can give me both the ILo name and the server name? Wed, 16 Jun 2004 16:40:08 GMT mike bowman_2 2004-06-16T16:40:08Z https://community.hpe.com/t5/server-management-systems/ilo-boards-in-im7/m-p/3307373#M3614 Insight manager is picking up the ILO boards for my servers, but when the board names are listed, they don't always have the server name associated with tehm. For example, some management Processor entries will be listed as ILO-xyz in server xyz, while other instances it will be just ILO-xyz or just the IP address. What setting can give me both the ILo name and the server name? Wed, 16 Jun 2004 16:40:08 GMT https://community.hpe.com/t5/server-management-systems/ilo-boards-in-im7/m-p/3307373#M3614 mike bowman_2 2004-06-16T16:40:08Z https://community.hpe.com/t5/server-management-systems/ilo-boards-in-im7/m-p/3307374#M3615 hi, i had the same problem with some old servers (pl5500). after installing the rib, you must go to the systempartion (smart start 5.50) to discover the new hardware.<BR /><BR />if you have new servers look into the following forum: <A href="http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=607420" target="_blank">http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=607420</A><BR /><BR />best regards<BR />chris<BR /> Fri, 25 Jun 2004 00:46:58 GMT https://community.hpe.com/t5/server-management-systems/ilo-boards-in-im7/m-p/3307374#M3615 Christian Mentschik 2004-06-25T00:46:58Z