topic Cannot compile Cisco/PGP MIBs in Server Management - Systems Insight Manager

Cannot compile Cisco/PGP MIBs

JUDDIN — Tue, 03 Mar 2009 13:06:32 GMT

Hello all,

I have downloaded the relevant MIBs for my router from the cisco website and renamed them from .my to .mib however when I try and compile them I get the following error:

C:\Program Files\HP\Systems Insight Manager\lbin>mcompile SNMPv2-SMI-V1SMI.mib

HP Systems Insight Manager Mib Compiler, Version 5.0.2.1
Copyright (c) 2003-2006 Hewlett Packard Corporation

Compiling SNMPv2-SMI-V1SMI.mib

Line: 0: Failure to open input file SNMPv2-SMI-V1SMI.mib
Mib compilation failed.

I am a newbie to insight manager and not sure what I'm doing wrong. I assume that SIM needs the cisco MIBs to translate the SNMP traps sent to it from the cisco switch/router/firewall.

Also, I managed to compile and load MIBs from our PGP server, but when I go to SNMP trap settings to view it, it has no trap settings stored.???

Any ideas would be greatly appreciated.

J

Re: Cannot compile Cisco/PGP MIBs

Rob Buxton — Tue, 03 Mar 2009 20:11:33 GMT

The first one I'm guessing is that it's calling another MIB (an include statement or similar)
You'll need to download that MIB, and any others called as well.

Re: Cannot compile Cisco/PGP MIBs

David Claypool — Tue, 03 Mar 2009 23:33:32 GMT

"renamed them from .my to .mib"

I'm not sure what a .my file is. In order to be compiled, it needs to be a MIB text file. Also, as this identifies itself as SNMPV2, you may not be able to use this with HP SIM as it only understands SNMPV1.