https://community.hpe.com/t5/server-management-systems/detached-dc-timeout-parameter-non-existent-on-hpsim-5-3/m-p/4372123#M36700 Sometimes when you run Data Collection, it times out saying you have to check and possibly modify some parameters including Detached_DC_Timeout.<BR />This error message appears also on HPSIM 5.3 but when you search for it using mxglobalsettings command you end up by finding there is no such a parameter. There was such a parameter but on HPSIM 5.2. <BR />There is also another parameter named DataCollectionMinIntervalMinutes that is specified when you try to run a Data Collection job sooner than this parameter specifies. This parameter also exists on HPSIM 5.2 but not on 5.3. <BR />It seems to me that this version 5.3 was released sooner than should have been. Thu, 05 Mar 2009 07:38:42 GMT Mugur Stef_1 2009-03-05T07:38:42Z https://community.hpe.com/t5/server-management-systems/detached-dc-timeout-parameter-non-existent-on-hpsim-5-3/m-p/4372123#M36700 Sometimes when you run Data Collection, it times out saying you have to check and possibly modify some parameters including Detached_DC_Timeout.<BR />This error message appears also on HPSIM 5.3 but when you search for it using mxglobalsettings command you end up by finding there is no such a parameter. There was such a parameter but on HPSIM 5.2. <BR />There is also another parameter named DataCollectionMinIntervalMinutes that is specified when you try to run a Data Collection job sooner than this parameter specifies. This parameter also exists on HPSIM 5.2 but not on 5.3. <BR />It seems to me that this version 5.3 was released sooner than should have been. Thu, 05 Mar 2009 07:38:42 GMT https://community.hpe.com/t5/server-management-systems/detached-dc-timeout-parameter-non-existent-on-hpsim-5-3/m-p/4372123#M36700 Mugur Stef_1 2009-03-05T07:38:42Z