topic Re: Port 5989 in Server Management - Systems Insight Manager

Port 5989

ehuang — Fri, 06 Mar 2009 21:08:23 GMT

WMIServer.exe takes port 5989 on my CommandView server, and the HP SIM server is getting info from my SAN through CommandView through port 5989 too. Every time I have to end WMIServer session in order to get my SAN information for the SIM server. How do I fix this? Many thanks.

Re: Port 5989

Rob Buxton — Sat, 07 Mar 2009 00:18:39 GMT

The Installation Guide covers off what you need to do in order to run CV and HPSIM on the same server.

Re: Port 5989

ehuang — Sat, 07 Mar 2009 13:29:55 GMT

Sorry Rob. I should have mentioned that my CV and SIM are on different servers. thought?

Re: Port 5989

Van Tongerloo Marc — Fri, 05 Jun 2009 10:08:47 GMT

Rob,

I found that problem too. Looking into it I found that the SSL port has been changed to 60000 in cxws.properties.
I have two questions then:
- can we see something in logfiles when the ports have been changed (no question pops up during the CV installation).
- what installation guide do we need to consult for this to work?

Kind regards,

MarcVT (Belgium)

Re: Port 5989

Micke_Ch_1 — Fri, 05 Jun 2009 10:17:35 GMT

Hi!

Look at this doc.
http://docs.hp.com/en/5900-0064/index.html

At chapter eleven you will fins all your answers...

/Micke Ch

Re: Port 5989

Van Tongerloo Marc — Fri, 05 Jun 2009 11:43:35 GMT

Hi,

We followed that document already but it didn't solve the problem.
We didn,t get the error from the CV-EVA 9.0.1 that there was a conflict with the ports. Nevertheless, in the wxcs file the SSL port has been changed to 60000. Is this normal behavior?

Kind regards,

MarcVT