topic Re: RILOE recognition in Server Management - Systems Insight Manager

RILOE recognition

mike bowman_2 — Tue, 22 Jun 2004 08:53:02 GMT

On the home tab in Insight manager 7, there is no management processor being picked up for some of my servers. However, if I go to the devices tab and look at the management processors, they are listed there. Any idea what might be causing this?

Re: RILOE recognition

James Kennedy_4 — Tue, 22 Jun 2004 12:59:08 GMT

This forum is mainly for SIM, however I beleive the same goes for IM7. You must discover the management processor as a device, just like the server. You should both devices in your listing. Try discovering the IP of your management processors.

Re: RILOE recognition

Alain Staelen — Thu, 24 Jun 2004 12:42:15 GMT

I think you also need to put the IP address/servername of the server into the configuration of the RIBLOE.

Under Administration TAB, SNMP/Insight Manager Settings enter the info under insight Manager web agents URL.
Also put the data returned on "High".

It fixed it for a number of my servers. The rest is probably DNS related.

Re: RILOE recognition

Christian Mentschik — Fri, 25 Jun 2004 01:05:45 GMT

put the server in the sim. after that, put the rib to the sim. then check the server and start under options > discovery the identify systems... . it helps me in some cases.

best regards chris