https://community.hpe.com/t5/server-management-systems/snmp-test-trap-to-sim/m-p/4430010#M37645 hi,<BR /><BR /> you can select "Automatically discover a system when an event is received from it" in the "General Settings for All Discoveries" section, dependant on whether snmp is enabled in the global protocol settings or that the ip range is excluded.<BR /><BR />hth<BR /><BR /> Mon, 01 Jun 2009 06:45:30 GMT marsh_1 2009-06-01T06:45:30Z https://community.hpe.com/t5/server-management-systems/snmp-test-trap-to-sim/m-p/4430009#M37644 Hi,<BR /><BR />I would like to send a test snmp trap everytime a server gets newly built so that I dont need to rely on discovery job to find the system... <BR />Too much ip address ranges update happening recently , so I cant really keep tracking on new subnet creation/deletion etc... <BR /><BR />Please advise for the best practice to manage this...<BR /><BR />Many thanks!<BR />Regards,<BR />Riks <BR /> Mon, 01 Jun 2009 06:28:06 GMT https://community.hpe.com/t5/server-management-systems/snmp-test-trap-to-sim/m-p/4430009#M37644 Riks_2 2009-06-01T06:28:06Z https://community.hpe.com/t5/server-management-systems/snmp-test-trap-to-sim/m-p/4430010#M37645 hi,<BR /><BR /> you can select "Automatically discover a system when an event is received from it" in the "General Settings for All Discoveries" section, dependant on whether snmp is enabled in the global protocol settings or that the ip range is excluded.<BR /><BR />hth<BR /><BR /> Mon, 01 Jun 2009 06:45:30 GMT https://community.hpe.com/t5/server-management-systems/snmp-test-trap-to-sim/m-p/4430010#M37645 marsh_1 2009-06-01T06:45:30Z