topic Re: HP SIM 5.X new version in Server Management - Systems Insight Manager

HP SIM 5.X new version

vijay kumar.j — Mon, 22 Jun 2009 14:35:57 GMT

Hi all,

CAn help in this?

i have download and installed HP SIM 5.X new version in my pc.

I could not able get my server details in SIM we are using NLB concept with two server, it show Virtual IP only. how will i get the details of all my servers.

Regards
Vijay

Re: HP SIM 5.X new version

Rob Buxton — Tue, 23 Jun 2009 06:49:57 GMT

By default HPSIM will discover all of the servers in the subnet of the device it was installed on.

With servers with NLB I usually add the virtual Port to the Discovery Exclusion list and delete it if it was discovered.

Then manually discover (or check they're in the discovery range) the servers.

Re: HP SIM 5.X new version

vijay kumar.j — Fri, 26 Jun 2009 14:34:57 GMT

Thanks,

now it works fine. I found that HP insight management agent is not installed, after installing this it works fine.

Regards
Vijay

Re: HP SIM 5.X new version

Rob Buxton — Sun, 28 Jun 2009 20:06:23 GMT

Look at installing the entire Proliant Support Pack. They're bundled releases.

Re: HP SIM 5.X new version

Ralf Hesse_1 — Thu, 30 Jul 2009 06:47:47 GMT

Hi,

another solution is, to activate the clustering information management agents at both servers. Then it is possible to discover and monitor both server correctly and the virtual ip address (NLB) also.
NLB is then disovered with system type "cluster".

It works fine for me.

Regards
Ralf