topic Re: Integrity iLO (MP) associations in Server Management - Systems Insight Manager

Integrity iLO (MP) associations

Michael Leu — Wed, 05 Aug 2009 08:33:58 GMT

How does SIM decide when to associate a Management Processor (MP) with a system?

On the ProLiants every iLO has been associated perfectly. With the HP-UX systems it is hit and miss, even on "identical" systems some get linked and some don't (for example of 30 rx4640 only 3 have a MP associated :)

Running SIM 5.3 with SP1 - Windows

Thanks!

Re: Integrity iLO (MP) associations

Daniel Leblanc — Wed, 05 Aug 2009 12:43:10 GMT

Well this can be a little bit tuff,reason originaly HP SIM was done for HP windows system, so there still a few bugs.

a have over 45 HP intergrty with HP-UX,it more in the HP Home page with the agent the get the result,try and try again it might show.

Dan

Re: Integrity iLO (MP) associations

Michael Leu — Mon, 10 Aug 2009 12:37:18 GMT

Yeah sadly there is really big room for improvement in regards to SIM and HP-UX servers...

So anyway I digged around a in SIM and in the file
config\identification\noderelationships\basicNodeRelationships.xml
there is this section:

Servers_MgmtProc
Server
com.hp.mx.core.tools.identification.associations.MPtoServersHandler

MgmtProcToServer_IPF
MgmtProcToServer_PA
MgmtProcToServer_Complex

So how can I find out more about com.hp.mx.core.tools.identification.associations.MPtoServersHandler? Maybe some logfiles somewhere?

Re: Integrity iLO (MP) associations

Daniel Leblanc — Mon, 10 Aug 2009 12:39:42 GMT

Witch version of HP-UX do you have 11.1...etc..

Daniel

Re: Integrity iLO (MP) associations

Daniel Leblanc — Mon, 10 Aug 2009 12:41:58 GMT

If i remember well there a version that i association with ILO that does not work.my hp-ux specialiste tried and tried, i think the reason some of mine works is because of the version of HP-UX...sorry only windows specialiste i am!

hope this helps a bit.

Daniel

Re: Integrity iLO (MP) associations

Daniel Leblanc — Mon, 10 Aug 2009 12:45:21 GMT

hereo is article on the same probleme you have

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1076374

Daniel

Re: Integrity iLO (MP) associations

Michael Leu — Mon, 10 Aug 2009 13:07:47 GMT

Thanks for the replies Daniel.

I have HP-UX 11.11, 11.23 and 11.31 in SIM.

11.11 and PA-RISC will never work, these have ancient management processors (called GSP).

This is about the 11.23 and 11.31 systems on Integrity Hardware (iLO for Integrity aka MP) that most of the time do not get associated.

The thread you mentioned is about ProLiant Hardware, which is totally different. SIM gets its ProLiant iLO associations by retrieving https:///xmldata?item=all but there seems to be no similiar functionality in Integrity iLO... So I wonder how MPtoServersHandler does it.

Re: Integrity iLO (MP) associations

Michael Leu — Fri, 11 Sep 2009 12:26:52 GMT

With the help of this thread http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1171174
I did find out some more about this issue. Some of the unassociated MPs are missing the "System Subtype" setting of
"HP Single Partition Server, Management Processor".

Setting the subtype manually and verifying with "mxnode -ld " that "Device subtype: MP-SPS" is set, then re-identifying in SIM, the association is made.

As said in the other thread this can be verified with "mxnode -ld" of the MP and system and checking for "MP_IPF_UUID" and "IdentificationNumber".

But a lot of my other MPs are still not associateed because they are missing the "MP_IPF_UUID" although the subtype is correct. No idea what that could be, maybe I will open a case.