topic Re: HP SIM 4.x problem with Windows 2003 Server in Server Management - Systems Insight Manager

HP SIM 4.x problem with Windows 2003 Server

Andreas Cielanga — Wed, 30 Jun 2004 08:18:29 GMT

HELP!
Well, after scanning my IP Subnets for Compaq and HP Server the "All Systems" Tab only show Linux and Windows 2000 Servers but not my Windows 2003 Server. On the Windows 2003 Server side the latest HP Supportpack + HP Management Agents are installed and configured. SNMP is also installed and configured.
Is there something special to do that the HP SIM is able to "see" the Windows 2003 Machines? I've no idea where the problem could be.

Thanks and greetings from germany.

Andy C.

Re: HP SIM 4.x problem with Windows 2003 Server

Christian Mentschik — Wed, 30 Jun 2004 08:29:29 GMT

hi andy,
the only problems i had, was wrong configured snmp. have you changend the community strings? and not changend in SIM?
in the discovery filter, which criteria is checked?
Limit discovery to systems which meet the following criteria:
* Any system that matches the above filter
* All manageable systems (WBEM, SNMP, DMI or HTTP support)
* Manageable systems with HP agents only
i checked the 2 tab.

hope it will help and greetings from austria

christian

Re: HP SIM 4.x problem with Windows 2003 Server

Ivan KOVAC — Wed, 30 Jun 2004 08:43:17 GMT

Hello,

In windows 2003 the default settings for SNMP, tab security, is Accept SNMP pockets from these host : localhost. For properly discovered system in HPSIM you must add IP or name of your HPSIM server and 127.0.0.1 (localhost).

Ivan

Re: HP SIM 4.x problem with Windows 2003 Server

Andreas Cielanga — Wed, 30 Jun 2004 09:07:29 GMT

Success!

Well, the problem was the SNMP settings in Windows 2003. You need to manually add the server or set the option to accept all (like in windows 2000 and nt4).

Thank you all for your help!

Andy