https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319483#M3902 Any ideas on why a server running Windows 2000 will not boot after installation of most recent HP Insight Manager? <BR /><BR />Locks at blinking cursor after the Intel PXE boot process. Wed, 30 Jun 2004 11:30:31 GMT Robert Antos 2004-06-30T11:30:31Z https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319483#M3902 Any ideas on why a server running Windows 2000 will not boot after installation of most recent HP Insight Manager? <BR /><BR />Locks at blinking cursor after the Intel PXE boot process. Wed, 30 Jun 2004 11:30:31 GMT https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319483#M3902 Robert Antos 2004-06-30T11:30:31Z https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319484#M3903 is it possible, that the boot order changed? boot the server and the press F9 for the bios and look for the boot order.<BR /><BR />best regards christian Thu, 01 Jul 2004 00:38:32 GMT https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319484#M3903 Christian Mentschik 2004-07-01T00:38:32Z https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319485#M3904 Did you upgrade the bios also? I had this same issue after flashing the Bios, and I think I had to disable the PXE boot option to get around it. Tue, 06 Jul 2004 14:37:31 GMT https://community.hpe.com/t5/server-management-systems/server-not-booting-after-install/m-p/3319485#M3904 Craig Bradshaw 2004-07-06T14:37:31Z