https://community.hpe.com/t5/server-management-systems/imported-mib-not-appearing/m-p/4519319#M39182 <!--!*#-->HP SIM 5.3 with Update 1 on Linux - clean install.<BR /><BR />I successfully compiled and imported several MIBs. A trap sent appears as a recognized event, listing the correct MIB under the Trap Details section for the event.<BR /><BR />The problem is that the defined severity needed to be adjusted. Unfortunately, when I go to Options, Events, SNMP Trap Settings, the MIB is not listed at all.<BR /><BR />I can delete the MIB, no error, readd the MIB, no error, but it still does not show up.<BR /><BR />I have also compiled and imported a few other MIBs and they show up fine.<BR /><BR />I have uninstalled and reinstalled SIM, no luck.<BR /><BR />Any ideas? Thanks.<BR /> Thu, 22 Oct 2009 12:52:38 GMT Richard Swagel 2009-10-22T12:52:38Z https://community.hpe.com/t5/server-management-systems/imported-mib-not-appearing/m-p/4519319#M39182 <!--!*#-->HP SIM 5.3 with Update 1 on Linux - clean install.<BR /><BR />I successfully compiled and imported several MIBs. A trap sent appears as a recognized event, listing the correct MIB under the Trap Details section for the event.<BR /><BR />The problem is that the defined severity needed to be adjusted. Unfortunately, when I go to Options, Events, SNMP Trap Settings, the MIB is not listed at all.<BR /><BR />I can delete the MIB, no error, readd the MIB, no error, but it still does not show up.<BR /><BR />I have also compiled and imported a few other MIBs and they show up fine.<BR /><BR />I have uninstalled and reinstalled SIM, no luck.<BR /><BR />Any ideas? Thanks.<BR /> Thu, 22 Oct 2009 12:52:38 GMT https://community.hpe.com/t5/server-management-systems/imported-mib-not-appearing/m-p/4519319#M39182 Richard Swagel 2009-10-22T12:52:38Z