https://community.hpe.com/t5/server-management-systems/hp-network-configuration-utility-9-70-0-0/m-p/4530362#M39308 I installed the HP Network configuration utility (NCU) ver. 9.70.0.0 on a DL380 G6 running Server 2k3 SP2. In addition to the base 4 NIC ports, there are an additional 2 ports on a NC328T card. When I try to run the Network Configuration Utility, I get the following error: "An error occured due to invalid data in XML file used by this application. The XML file has ben corrupted and should be reinstalled from the installation media." <BR /><BR />I've tried re-installing the NCU, downgrading to an old version of the NCU, and downgrading and re-upgrading. I still get the same error. Does anyone know what file it's talking about and how to get around this? Mon, 09 Nov 2009 18:00:37 GMT Claude Gigoux 2009-11-09T18:00:37Z https://community.hpe.com/t5/server-management-systems/hp-network-configuration-utility-9-70-0-0/m-p/4530362#M39308 I installed the HP Network configuration utility (NCU) ver. 9.70.0.0 on a DL380 G6 running Server 2k3 SP2. In addition to the base 4 NIC ports, there are an additional 2 ports on a NC328T card. When I try to run the Network Configuration Utility, I get the following error: "An error occured due to invalid data in XML file used by this application. The XML file has ben corrupted and should be reinstalled from the installation media." <BR /><BR />I've tried re-installing the NCU, downgrading to an old version of the NCU, and downgrading and re-upgrading. I still get the same error. Does anyone know what file it's talking about and how to get around this? Mon, 09 Nov 2009 18:00:37 GMT https://community.hpe.com/t5/server-management-systems/hp-network-configuration-utility-9-70-0-0/m-p/4530362#M39308 Claude Gigoux 2009-11-09T18:00:37Z