https://community.hpe.com/t5/server-management-systems/is-there-a-way-to-test-receiving-wbem-events-from-managed-linux/m-p/4611674#M40559 I there a way to test receiving WBEM events from a Linux host with the WBEM agents on the HP SIM CMS? <BR /><BR />I have a HP SIM 5.3 SP1 CMS running on a Linux VM. I also have several Linux hosts configured with the WBEM agents. <BR /><BR />In HP SIM I've checked to "Accept unregistered events". I've subscribed to the hosts WBEM events and runing the mxwbemsub -l -n <HOSTNAME> command on the CMS shows the correct WBEM subscription. Also the host in SIM shows WBEM as one of the management protocols. <BR /><BR />From the CMS I've attempted to "Send A sample WBEM/WMI indication" which is under, configure, configure or repair agents...for some of the WBEM configured hosts. I receive the following for all the hosts I've tested: <BR /><BR />-Attempted on <HOSTNAME> (Credentials configured: SNMP, WBEM, Sign-In)<BR />LINUX configuration command (START)...<BR />Sending test indication to HP SIM CMS (START)...<BR />Send test WBEM/ WMI indication from the system (DONE)...............[SKIPPED] <BR />It is not supported on the system.<BR /><BR />When I run an "Identify System" for these same hosts I receive the following from the hosts when the WBEM support check is run: <BR /><BR />Checking for WBEM support on system.<BR />This system has WBEM protocol support<BR />This system has at least one SMI-S CIMOM installed<BR />This system has a server CIMOM installed<BR />Running WBEM rules based identification.<BR />Got ComputerSystem WBEM/WMI data from the system<BR /><BR />Is there any way to send a test WBEM event from the managed system to the CMS to verify that the communications is occuring? <BR /><BR />Thanks, <BR />Chris H.</HOSTNAME></HOSTNAME> Fri, 02 Apr 2010 16:36:05 GMT Chris Hasler 2010-04-02T16:36:05Z https://community.hpe.com/t5/server-management-systems/is-there-a-way-to-test-receiving-wbem-events-from-managed-linux/m-p/4611674#M40559 I there a way to test receiving WBEM events from a Linux host with the WBEM agents on the HP SIM CMS? <BR /><BR />I have a HP SIM 5.3 SP1 CMS running on a Linux VM. I also have several Linux hosts configured with the WBEM agents. <BR /><BR />In HP SIM I've checked to "Accept unregistered events". I've subscribed to the hosts WBEM events and runing the mxwbemsub -l -n <HOSTNAME> command on the CMS shows the correct WBEM subscription. Also the host in SIM shows WBEM as one of the management protocols. <BR /><BR />From the CMS I've attempted to "Send A sample WBEM/WMI indication" which is under, configure, configure or repair agents...for some of the WBEM configured hosts. I receive the following for all the hosts I've tested: <BR /><BR />-Attempted on <HOSTNAME> (Credentials configured: SNMP, WBEM, Sign-In)<BR />LINUX configuration command (START)...<BR />Sending test indication to HP SIM CMS (START)...<BR />Send test WBEM/ WMI indication from the system (DONE)...............[SKIPPED] <BR />It is not supported on the system.<BR /><BR />When I run an "Identify System" for these same hosts I receive the following from the hosts when the WBEM support check is run: <BR /><BR />Checking for WBEM support on system.<BR />This system has WBEM protocol support<BR />This system has at least one SMI-S CIMOM installed<BR />This system has a server CIMOM installed<BR />Running WBEM rules based identification.<BR />Got ComputerSystem WBEM/WMI data from the system<BR /><BR />Is there any way to send a test WBEM event from the managed system to the CMS to verify that the communications is occuring? <BR /><BR />Thanks, <BR />Chris H.</HOSTNAME></HOSTNAME> Fri, 02 Apr 2010 16:36:05 GMT https://community.hpe.com/t5/server-management-systems/is-there-a-way-to-test-receiving-wbem-events-from-managed-linux/m-p/4611674#M40559 Chris Hasler 2010-04-02T16:36:05Z https://community.hpe.com/t5/server-management-systems/is-there-a-way-to-test-receiving-wbem-events-from-managed-linux/m-p/4611675#M40560 Not that I've seen, but what I have seen with our ESXi hosts is a message indicating that the wbem service has started on the ESXi host after a reboot.<BR />You could jut try restarting the appropriate service. Not sure what that is though. Sun, 04 Apr 2010 20:17:23 GMT https://community.hpe.com/t5/server-management-systems/is-there-a-way-to-test-receiving-wbem-events-from-managed-linux/m-p/4611675#M40560 Rob Buxton 2010-04-04T20:17:23Z