topic Re: HP SIM 6.0 does not acknowledge the error is fixed in Server Management - Systems Insight Manager https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627120#M40891 Go to SMH of server, <BR />then change SMH source to SNMP, then u cat found on main page notification about "Integrated Management Log", open it and look at red messages. Thu, 16 Dec 2010 15:12:38 GMT Aleksey Hariton 2010-12-16T15:12:38Z HP SIM 6.0 does not acknowledge the error is fixed https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627118#M40889 We recently started using HP SIM after it had been idle for a few months.<BR />Some servers were reporting that a network link was down, but that was because they were 2 NIC systems where only one NIC was connected. We resolved this by disabling one network card, and SMH reports that everything is fine, but HP SIM still reports that "a network interface has failed".<BR />I have tried clearing the IML, tried rebooting, even re-installing agents, but SIM still reports it as an error.<BR />How can I mark this as resolved in SIM?<BR /><BR />Other systems also report "SNMP passthrough" or "There is a server problem that is degrading functionality" - but the server has no issues and nothing in any log reporting the issue or what it is. How can I diagnose and resolve this? Mon, 03 May 2010 06:25:33 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627118#M40889 ChristianWickham 2010-05-03T06:25:33Z Re: HP SIM 6.0 does not acknowledge the error is fixed https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627119#M40890 try rediscovering those systems <BR /> Fri, 18 Jun 2010 09:47:59 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627119#M40890 pirate_2 2010-06-18T09:47:59Z Re: HP SIM 6.0 does not acknowledge the error is fixed https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627120#M40891 Go to SMH of server, <BR />then change SMH source to SNMP, then u cat found on main page notification about "Integrated Management Log", open it and look at red messages. Thu, 16 Dec 2010 15:12:38 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-6-0-does-not-acknowledge-the-error-is-fixed/m-p/4627120#M40891 Aleksey Hariton 2010-12-16T15:12:38Z