https://community.hpe.com/t5/server-management-systems/sim6-delay-alert/m-p/4631675#M41000 <!--!*#-->Actually this alert is sent by a Hardware Status polling task named "Hardware Status Polling for Servers", which runs h/w status polling against servers every 5 mins,<BR /><BR />So, independent of the server failure time, this event will get generated within next 5 mins.<BR /><BR />May be u can change the interval if u wish.<BR /><BR />Hope this helps<BR /> Wed, 12 May 2010 04:49:09 GMT Newton S 2010-05-12T04:49:09Z https://community.hpe.com/t5/server-management-systems/sim6-delay-alert/m-p/4631674#M40999 Hi folks, is there a way to delay an alert? For example, if a server went down (not ping-able), can it be set to send alert only after 5 minutes? Thanks. Tue, 11 May 2010 12:57:28 GMT https://community.hpe.com/t5/server-management-systems/sim6-delay-alert/m-p/4631674#M40999 ehuang 2010-05-11T12:57:28Z https://community.hpe.com/t5/server-management-systems/sim6-delay-alert/m-p/4631675#M41000 <!--!*#-->Actually this alert is sent by a Hardware Status polling task named "Hardware Status Polling for Servers", which runs h/w status polling against servers every 5 mins,<BR /><BR />So, independent of the server failure time, this event will get generated within next 5 mins.<BR /><BR />May be u can change the interval if u wish.<BR /><BR />Hope this helps<BR /> Wed, 12 May 2010 04:49:09 GMT https://community.hpe.com/t5/server-management-systems/sim6-delay-alert/m-p/4631675#M41000 Newton S 2010-05-12T04:49:09Z