topic Re: Configure\Repair and Trust in Server Management - Systems Insight Manager

Configure\Repair and Trust

Tuscani_1 — Wed, 12 May 2010 19:42:16 GMT

Hey All - I have several servers that do not get my CMS cert when I run configure\repair agents, however, when I drill into the server and select the SMHP I am presented to install the cert and it installs fine. Any idea why the cert did not install via config\repair agents?

Thanks!

Re: Configure\Repair and Trust

PNair — Fri, 14 May 2010 17:43:30 GMT

Did you check the results from Configure\repair agents to see whether there are any errors..

Re: Configure\Repair and Trust

Tuscani_1 — Fri, 14 May 2010 17:47:50 GMT

See below.. the password I used is correct and there is not a firewall issue because several other on the same subnet were successful.

--

No trust relationship or Administrator password settings were changed on the tar
get system. There are no management applications utilizing the System Management
Homepage present on the target system.

Re-identifying system to get updated information ...

Re: Configure\Repair and Trust

Lars Bornich — Fri, 14 May 2010 18:12:50 GMT

Have you installed the management agents that SMH uses to report data? If there are no agents on the server, the SMH can't gather data.

Re: Configure\Repair and Trust

Tuscani_1 — Fri, 14 May 2010 18:25:32 GMT

Yes, the agents and SMH are installed

Re: Configure\Repair and Trust

Lars Bornich — Fri, 14 May 2010 19:49:48 GMT

When you log on to SMH on the server(s) in question, are you able to retrieve status information on all components in the server?

NIC, Storage, iLO, OS, Storage etc. ? If not, your management agents may be malfunctioning and will need to be re-initialized or re-installed.