https://community.hpe.com/t5/server-management-systems/snmp-to-wbem/m-p/4676692#M41853 We are in the process of switching from SNMP to WBEM on the SMH. We are using the SNMP server role field to categorize our servers for alerting. Since we are going to WBEM we are looking for a field to do the same type of thing. I did find the server role field under the Server Configurable Properties page, but do not see where this field information is populated into the SIM console. It also states that you can group these in SIM, but how do you do that if there is not field that is populated?<BR /><BR />Any information on how to get around this or what others have done would be appreciated. Wed, 18 Aug 2010 18:48:31 GMT CCrawford 2010-08-18T18:48:31Z https://community.hpe.com/t5/server-management-systems/snmp-to-wbem/m-p/4676692#M41853 We are in the process of switching from SNMP to WBEM on the SMH. We are using the SNMP server role field to categorize our servers for alerting. Since we are going to WBEM we are looking for a field to do the same type of thing. I did find the server role field under the Server Configurable Properties page, but do not see where this field information is populated into the SIM console. It also states that you can group these in SIM, but how do you do that if there is not field that is populated?<BR /><BR />Any information on how to get around this or what others have done would be appreciated. Wed, 18 Aug 2010 18:48:31 GMT https://community.hpe.com/t5/server-management-systems/snmp-to-wbem/m-p/4676692#M41853 CCrawford 2010-08-18T18:48:31Z