https://community.hpe.com/t5/server-management-systems/sim-integration-to-omw/m-p/4704573#M42344 The integration pieces appear to be installed correctly on OMw through the OMw SPI pack on the OMw server but I cannot locate the integration pieces on the SIM 6.2 server. Both applications are up and running in the same subnet. Am I missing something obvious?<BR />Thanks, Mon, 25 Oct 2010 18:21:19 GMT Bruce.Turner 2010-10-25T18:21:19Z https://community.hpe.com/t5/server-management-systems/sim-integration-to-omw/m-p/4704573#M42344 The integration pieces appear to be installed correctly on OMw through the OMw SPI pack on the OMw server but I cannot locate the integration pieces on the SIM 6.2 server. Both applications are up and running in the same subnet. Am I missing something obvious?<BR />Thanks, Mon, 25 Oct 2010 18:21:19 GMT https://community.hpe.com/t5/server-management-systems/sim-integration-to-omw/m-p/4704573#M42344 Bruce.Turner 2010-10-25T18:21:19Z https://community.hpe.com/t5/server-management-systems/sim-integration-to-omw/m-p/4704574#M42345 All of the SIM Node Groups, Policies and Tools are installed in OMw. An OMw Agent and HP SIM Integration Instrumentation have been deployed to the SIM Server... Other than deploying and tuning policies to the SIM server... is there anything else that needs to be done for basic message forwarding? I still have not found the HPSIMInt_omw_install.cmd that is referenced in the SIM integration documentation for 6.1. Mon, 25 Oct 2010 21:05:35 GMT https://community.hpe.com/t5/server-management-systems/sim-integration-to-omw/m-p/4704574#M42345 Bruce.Turner 2010-10-25T21:05:35Z