topic HP-SIM 6.2 and EVA4400 (CVEVA 9.3) in Server Management - Systems Insight Manager

HP-SIM 6.2 and EVA4400 (CVEVA 9.3)

Lovro VRES — Fri, 26 Nov 2010 13:40:46 GMT

Hello,

I have installation of HP-SIM 6.2 and CommandView EVA 9.3. I have both installation on the same server (Windows server 2008 x64).

The problem is I cannot see my two EVA 4400 storages in HPSIM. I installed CIMOM on ports 6988 and 6989 and leave WMI Proxy on ports 5988 and 5989.

I tried several things, but still have the same problem. I also try to use wbemdisco, discoverer.bat and identify system in HPSIM. I'm attaching the result screen shots.

Is there any idea?

Regards,
Lovro

Re: HP-SIM 6.2 and EVA4400 (CVEVA 9.3)

Rob Buxton — Sat, 27 Nov 2010 00:14:09 GMT

Does that account exist in the Storage Admins group on the CV Server?
It needs that priv to be able to get the details.

Re: HP-SIM 6.2 and EVA4400 (CVEVA 9.3)

Jairo P. Paula — Sat, 27 Nov 2010 00:38:56 GMT

Hi,

That's why there's a conflict between the SMI-S port's HPSIM and CV-EVA). If you have installed the CV after the HPSIM, the CV is using the port 60000.
So just change the file "C:\Program Files\HP\Systems Insight Manager\config\ identification\wbemportlist.xml", inserting these lines in the end of that file.

Jairo.
---------------------------------------
<=== insert here

<=== end of insertion.

------------------------------------

Re: HP-SIM 6.2 and EVA4400 (CVEVA 9.3)

Jairo P. Paula — Sat, 27 Nov 2010 00:44:41 GMT

There's an HP paper talking about it. Take a look.

Jairo.

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-0426ENW.pdf