topic Re: HP SIM - Not showing trap details. in Server Management - Systems Insight Manager

HP SIM - Not showing trap details.

Ravi Shankar Jandyala — Wed, 08 Dec 2010 18:56:59 GMT

I am integrating 3rd party mibs into SIM 6.2 and registered mibs and able to receive traps from the devices. However, i am not able to see any varbind in the trap in the "trap Details" section of the event in the SIM GUI.
Did anyone seen this before? If so, what fixed the problem? I appreciate any help on this.
Thanks.

Re: HP SIM - Not showing trap details.

jim goodman — Fri, 10 Dec 2010 00:21:09 GMT

What version of SNMP are the mibs?

SNMPv1 mibs only supply very limited info in the first place - are you certain the raw mibs contain the info you are expecting to see?

Other versions or custom mibs may not be parsed and passed properly. SIM really only supports SNMPv1 mibs I believe.

Re: HP SIM - Not showing trap details.

Ravi Shankar Jandyala — Fri, 10 Dec 2010 14:36:03 GMT

Thanks for the response. The SNMP version of the trap is V1. I have verified the trap details using another tool, and all 11 varbinds are presented in the trap. Please see the attached screen shot.

Thanks,
Ravi