https://community.hpe.com/t5/server-management-systems/insight-manager/m-p/4767053#M43385 Hi<BR /><BR />The best that HP SIM can achieve is the following : <BR />1/you go for a new report<BR />2/you select all servers collection<BR />3/you name the report<BR />4/you select the relevant part of the report (CPU/ smart arrays, dimms, etc..)<BR />5/you select the layout for the display : Layout for generated or saved report:<BR /> Show all systems in the same table<BR /> Show each system in a separate table <BR />you need to show each system in a sparate table.<BR />6/select HTML<BR />7/run report<BR /><BR />This is the closest you can get to what your customer wants to achieve. This way the data will be displayed accordingly for each server. The cpu block will be followed by the memory block so on and so on for each server.<BR /><BR />hope it helps<BR /><BR />fred<BR /><BR /> Fri, 18 Mar 2011 13:49:32 GMT fred Passeron 2011-03-18T13:49:32Z https://community.hpe.com/t5/server-management-systems/insight-manager/m-p/4767052#M43384 I have a customer that wants to print server reports that just have the server at the top and then the components listed under each server. How do I do this or is it possible? Fri, 18 Mar 2011 12:54:45 GMT https://community.hpe.com/t5/server-management-systems/insight-manager/m-p/4767052#M43384 TWESSON 2011-03-18T12:54:45Z https://community.hpe.com/t5/server-management-systems/insight-manager/m-p/4767053#M43385 Hi<BR /><BR />The best that HP SIM can achieve is the following : <BR />1/you go for a new report<BR />2/you select all servers collection<BR />3/you name the report<BR />4/you select the relevant part of the report (CPU/ smart arrays, dimms, etc..)<BR />5/you select the layout for the display : Layout for generated or saved report:<BR /> Show all systems in the same table<BR /> Show each system in a separate table <BR />you need to show each system in a sparate table.<BR />6/select HTML<BR />7/run report<BR /><BR />This is the closest you can get to what your customer wants to achieve. This way the data will be displayed accordingly for each server. The cpu block will be followed by the memory block so on and so on for each server.<BR /><BR />hope it helps<BR /><BR />fred<BR /><BR /> Fri, 18 Mar 2011 13:49:32 GMT https://community.hpe.com/t5/server-management-systems/insight-manager/m-p/4767053#M43385 fred Passeron 2011-03-18T13:49:32Z