https://community.hpe.com/t5/server-management-systems/blade-server-rebooting-overheating-since-adding-hp-agents/m-p/4781505#M43639 If you have latest ilo firmware, i'd log a hardware call to hp. Wed, 27 Apr 2011 06:37:39 GMT shocko 2011-04-27T06:37:39Z https://community.hpe.com/t5/server-management-systems/blade-server-rebooting-overheating-since-adding-hp-agents/m-p/4781504#M43638 I recently added hp agents to my blade servers. All of them are reporting healthy with the exception of one server which now continually reboots. Before adding the agents on this server it did have event id 1135 regarding a temperature sensor. Though when looking at hpsim none of the temperatures seem too high. Also before adding the agents the fans in my blade enclosure ran at a steady 35%. Now if I even turn this server on the fans go to 90% and stay there. After awhile the server will then reboot on its own. I have the latest ILO and HPSim agents. I have seen others having similar issues all the way back to the Spring of 2009. Any suggestions? Tue, 26 Apr 2011 19:00:14 GMT https://community.hpe.com/t5/server-management-systems/blade-server-rebooting-overheating-since-adding-hp-agents/m-p/4781504#M43638 Andrew Knoke_1 2011-04-26T19:00:14Z https://community.hpe.com/t5/server-management-systems/blade-server-rebooting-overheating-since-adding-hp-agents/m-p/4781505#M43639 If you have latest ilo firmware, i'd log a hardware call to hp. Wed, 27 Apr 2011 06:37:39 GMT https://community.hpe.com/t5/server-management-systems/blade-server-rebooting-overheating-since-adding-hp-agents/m-p/4781505#M43639 shocko 2011-04-27T06:37:39Z