https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782189#M43652 I want to find support matrix for SIM 6.3 use with command view in EVA4400.(want to know which firmware can support SIM 6.3) Pls advice ? Thu, 28 Apr 2011 07:41:05 GMT Sansoen Chumphunut 2011-04-28T07:41:05Z https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782189#M43652 I want to find support matrix for SIM 6.3 use with command view in EVA4400.(want to know which firmware can support SIM 6.3) Pls advice ? Thu, 28 Apr 2011 07:41:05 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782189#M43652 Sansoen Chumphunut 2011-04-28T07:41:05Z https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782190#M43653 I use SIM 6.3 now with command view 9.3, but it's with an EVA6100. I haven't seen anything where the the HPSIM version is dependant on eva firmware, only command view. Sorry I don't have more info. Sat, 30 Apr 2011 14:11:31 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782190#M43653 Michigan Dave 2011-04-30T14:11:31Z https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782191#M43654 Like th above poster I don't have the EX4400 (we have an 8000 &amp; 6000) but a quick look at the specs suggests the EVA4400 is also managed via CommandView.<BR />In that case you need to add credentials that have access to CommandView into HPSIM for the server hosting CommandView.<BR /><BR />HPSIM doesn't care about the firmware of the EVA and works with most versions of CommandView. Sun, 01 May 2011 01:34:33 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-for-manage-storage/m-p/4782191#M43654 Rob Buxton 2011-05-01T01:34:33Z