https://community.hpe.com/t5/server-management-systems/hp-smh-ide-error-device-n-a/m-p/4789340#M43743 hello,<BR />I have a problem with a DL320G5 with Red Hat 3<BR /><BR />In the SMH the standard IDE controller shows error, I install the actuall firmware (using boot DVD (FW920B.2010_1129.2.iso) and de- and re-install the HP-agents.<BR />But still the same error. The SATA which we use for the disks is OK, I think this is only the unused Controller from DVD/CD drive.<BR />But how can I get this part also in state "green"?<BR />I can't find an option to disable IDE in the BIOS, this will be OK for me.<BR /><BR />Thanks! Wed, 18 May 2011 11:26:12 GMT dark-sun 2011-05-18T11:26:12Z https://community.hpe.com/t5/server-management-systems/hp-smh-ide-error-device-n-a/m-p/4789340#M43743 hello,<BR />I have a problem with a DL320G5 with Red Hat 3<BR /><BR />In the SMH the standard IDE controller shows error, I install the actuall firmware (using boot DVD (FW920B.2010_1129.2.iso) and de- and re-install the HP-agents.<BR />But still the same error. The SATA which we use for the disks is OK, I think this is only the unused Controller from DVD/CD drive.<BR />But how can I get this part also in state "green"?<BR />I can't find an option to disable IDE in the BIOS, this will be OK for me.<BR /><BR />Thanks! Wed, 18 May 2011 11:26:12 GMT https://community.hpe.com/t5/server-management-systems/hp-smh-ide-error-device-n-a/m-p/4789340#M43743 dark-sun 2011-05-18T11:26:12Z