topic Deploying HP SIM as Virtual Machine caveats ? in Server Management - Systems Insight Manager

Deploying HP SIM as Virtual Machine caveats ?

Server-Support — Mon, 23 May 2011 02:44:59 GMT

Hi All,

May I know if it is OK or possible to deploy HP SIM as Virtual Machine ?

If so then what would be the caveats that I need to know or limitations as a Virtual machine as oppose to physical machine ?

Thanks,

Re: Deploying HP SIM as Virtual Machine caveats ?

Rob Buxton — Mon, 23 May 2011 19:16:12 GMT

HPSIM can be deployed onto a virtual machine. You can also deploy the remote support software as well.

The main caveat mentioned is network performance as HPSIM does generate quite a bit of traffic. It's not caused issues here.

We run it virtual and monitor around 40 physical and 260 virtual servers.

Re: Deploying HP SIM as Virtual Machine caveats ?

radek zima_1 — Tue, 24 May 2011 05:04:14 GMT

I've seen issues with some plugins in past (performance monitoring and insight remote support), but version 6.2 runs well inside virtual machine on ESX ...

Re: Deploying HP SIM as Virtual Machine caveats ?

Blazhev_1 — Tue, 24 May 2011 17:52:44 GMT

You can check on page 5 - discusses exactly the same although the doc is few yrs old :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01328849/c01328849.pdf?jumpid=reg_R1002_USEN

Re: Deploying HP SIM as Virtual Machine caveats ?

Server-Support — Tue, 24 May 2011 22:44:30 GMT

ah IC, so in this case it seems that I can use VMware ESX to host HP-SIM as a VM, however the most important thing that I need to use is the Server error reporting back-to-base.

Does this feature use "Service Essentials Remote Support Pack" ?

Re: Deploying HP SIM as Virtual Machine caveats ?

Blazhev_1 — Thu, 26 May 2011 07:27:14 GMT

According the same doc(page 6), you can't run RSP on VM but as I said above this doc is very old one so seems the info for RSP there is outdated.

Seems it is now supported since release 5.40A, release notes discuss the supported virtual environments:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02477192/c02477192.pdf

Dedicated document discussing RSP support on and for VM(s):

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02531448/c02531448.pdf

Re: Deploying HP SIM as Virtual Machine caveats ?

Rob Buxton — Fri, 27 May 2011 22:38:27 GMT

We're running the RSP on a VM. The main thing you need to do in HPSIM is to configure the properties of the HPSIM VM as a "Proliant". The HPSIM Server needs to be included in the RSP and this fakes it as a physical server.
It is documented.

Re: Deploying HP SIM as Virtual Machine caveats ?

Server-Support — Sat, 28 May 2011 00:21:13 GMT

Many thanks Rob for your explanation, I appreciate that.

Re: Deploying HP SIM as Virtual Machine caveats ?

ehansen76 — Fri, 08 Jul 2011 13:18:28 GMT

Anyone know if you can install HP Sim on a vm hosted by hyper-v and not esx?

Re: Deploying HP SIM as Virtual Machine caveats ?

MikeWachholz — Mon, 21 Nov 2011 15:23:35 GMT

@Rob Buxton wrote:
We're running the RSP on a VM. The main thing you need to do in HPSIM is to configure the properties of the HPSIM VM as a "Proliant". The HPSIM Server needs to be included in the RSP and this fakes it as a physical server.
It is documented.

Can you tell me where it is documented? I added ProLiant to the System Properties, and now it shows in my entitlement list, but it has a red X in the entitlement column?

Thanks,
Mike

Re: Deploying HP SIM as Virtual Machine caveats ?

igor-k — Wed, 29 Feb 2012 13:45:45 GMT

Same question here. Is it possible to install HP SIM to the Hyper-V guest Windows 2008 R2 OS?

Re: Deploying HP SIM as Virtual Machine caveats ?

reotrans — Wed, 29 Feb 2012 20:17:30 GMT

Sure -- we've been running SIM (6.0->6.3) on a 2008 R2 Std SP1 VM inside a Hyper-V cluster for over a year

Re: Deploying HP SIM as Virtual Machine caveats ?

shocko — Mon, 05 Mar 2012 23:15:39 GMT

I have run SIM 6.3 on ESX/ESXi/Hyper-v/Sun Virtual Box without any issues provided the advice that Rob gave about setting the system type of the vm to 'proliant' is followed.

Re: Deploying HP SIM as Virtual Machine caveats ?

isrgff — Tue, 06 Mar 2012 09:13:39 GMT

Still have no clue about this "fake Proliant". Could you explain, shocko ?

Re: Deploying HP SIM as Virtual Machine caveats ?

shocko — Tue, 06 Mar 2012 09:52:55 GMT

When you deploy the CMS on a VM, the hardware type will be 'VMWare' as opposed to Proliant so you need to manually change this under the system properties in SIM for the CMS node.